The Model AG1000 and AG1010 line regulators are ideal for high flow delivery (pipeline) systems requiring high leak integrity and guaranteed gas purity levels. The large main valve and flow capacity of Cv=1.0, allow for flow rates up to 100 scfm at a maximum inlet pressure of 3000 psig,

Model AG1000 is suitable for non-corrosive service, while Model AG1010 is designed for corrosive gas applications.

• Metal to Metal Diaphragm to Body Seal (without back-up o-ring) assures maximum diffusion resistance.
• High Purity Regulator Design permits vacuum purging of regulator.
• In-line Porting permits direct installation of regulator in piping system.
• Balanced Poppet (stem) minimizes effect of changes in inlet pressure on delivery pressure settings.
• Filter traps foreign matter, extends regulator life and reduces maintenance.
• Threaded Holes in Rear of Regulator permit front panel mounting.
• 21?2" Gauge reads easily for more precise settings.

• Mounting Ring permits regulator to be panel mounted
• Regulator Mounting Plate allows for easy mounting of regulator to wall or panel.
• Internal (Inboard) Helium Leak Test and Test Report determines inboard leak rate of gas from regulator to atmosphere; test report certifies leak rate of less than 2 x 10^-8sccs air equivalent.
• External (Outboard) Helium Leak Test and Test Report determines outboard leak rate of gas from regulator to atmosphere; test report certifies leak rate of less than 5 x 10^-7 sccs air equivalent.

Table I